Scanbodies
Dynamic Scanbody
The scanbody detects the position and orientation of the respective dental implant or analog in CAD-CAM scanning procedures. There are no holes in the upper section which means the Z axis is free to i...
Adaptador Dynamic Scanbody
It is a connecting element between the scanning body and the implant. Marked with different colors according to compatibility.
OP Scanbody
A single piece made of titanium placed at 10 mm height from the implant. It features two thread holes to attach Peek Pins (if it is necessary). The DAS code is printed on the surface.
Reference Scanbody
The Reference Scanbody is made of titanium and is designed to improve scanning for edentulous cases. - Peek Pins can be used for best scanning - The Reference Scanbody is compatible with different Mul...
Scanalog
The ScAnalog is a scanbody with implant connection that allows the position of the dental implant to be digitised using an extraoral scanner directly in the impression tray. It eliminates the need for...
Scanbody Laboratorio
The angulation cut of the chimney always goes on the opposite side of the scanbody lateral cut.
PreScanbody
Method that provides an initial reference thanks to a scan before/after proceeding with implant placement. The components used are: DAS PreScanbody and DAS Anchor Screw.